Reset Ink Counter/Level Canon iP1000

This printer is low budget, the one that I like most is the fast printing.

The problem that I have when using this printer is when the ink waste absorber is full, and he start to blink. Ok guys, Here's some tips for you who still use this printer.

How to physically change the ink waste absorber? Pixma ip1000
The waste ink absorbers can be found at the bottom of the printer case.

Normally you'll have to open the printer case, loose the screws of the print unit and remove the hole print unit from the lower part of the printer case.

4 step to Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again

If your IP1000 Blinking try this Tips :

Step 1: Manual for Service mode
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)

Step 2 : Software for Permanent
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500", Downloadh The Software here
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now work normally

Notes. Before you decide to reseting the waste ink counter, you should really clean up the ink absorber, or else you will find the ink waste absorber overflow.